Carvin Blog Carvin Guitars & Basses In Stock Carvin BBS
Back to Carvin Guitars & Pro Audio Carvin Guitars & Pro Audio Customer Service
    SIGN UP FOR OUR EMAIL NEWSLETTER SEARCH THE SITE            
  
  

the 100W LEGACY includes...
• 2 INCREDIBLE SOUNDING CHANNELS (CLEAN & OVERDRIVE)
• SEPARATE VOLUME, BASS, MID, TREBLE & PRESENCE CONTROLS FOR EACH CHANNEL
• MASTER REVERB FOR BOTH CHANNELS
• EFFECTS LOOP
• ALL TUBE: 4-EL34, 5-12AX7A
• CELESTION™ VINTAGE 30 SPEAKERS
• CLOSED BACK DESIGN
• CLOSED OR OPEN BACK DESIGN ON VL212 COMBO

Steve worked very closely with Carvin Engineering to develop the sound and look of the Legacy Amplifiers from the choice of EL34 tubes to the Celestion™ Vintage 30 speakers. His involvment with Carvin goes back to the early '80's when Steve played the Carvin X100B amp as a member of Frank Zappa's band. Discussions of the possibility of a signature amp had been ongoing for several years. Finally, Vai's and Carvin's schedules allowed for serious work on a new amp project.

Exhaustive listening tests of various tube and electronic circuits were performedby Steve. He also tested dozens of PAGE enclosures loaded with various vintage speakers and PAGE speakers. His ear kept coming back to the Celestion™ speakers.

After final approval of the amp and speakers, Steve then put his focus on the styling of the Legacy. His personal touches include the classic color scheme and his personal anagram logo on the nameplate. Steve is currently recording a new album with his Legacy and will embark on a tour come summer 1999. But you don't have to wait to see or hear the Legacy. Order yours Factory Direct from Carvin.com.

 
SPECS:
VL100 HEAD & VL212 COMBO AMP
• Dual channels (clean & overdrive/sustain)
• Separate Volume, Bass, Mid, Treble & Presence for each channel. Master Reverb for both channels
• 50/100W output switch
• Bias switch for 5881, 6L6GCÍs or EL34 power tubes (supplied with EL34)
• Cabinet voiced line output
• 4, 8 or 16 ohm speaker imp. switch
• Effects Loop
• All tube: 4­EL34, 5­12AX7A
• Hand crafted 7-layer plywood cabinet (not particle board)
• Optional FS22 foot switch for selecting channels & reverb
• VL100: 24.25" wide x 10.5" high x 9.5" deep, Weight: 40 lbs.
• VL212: 26" wide x 10.25" deep x 17.5" high, Weight: 62 lbs.
• Warranty: 1 year.
• Made in San Diego, California
© 1996 - 2009 Carvin Corporation - All Rights Reserved 
Carvin.com