Please abide by the following rules:   a. For issues with shipping, repairs or complaints, use the CONTACT page.   b. No private sales, auctions or advertising services allowed.   c. No topics of a political or religious nature, profanity, flaming other members or general bad behavior.
	Carvin.com    Pro Audio    Guitars/Basses    Guitar Parts    Guitars-in-Stock    Guitar Amps    Bass Amps    Sales/Specials    Gift Shop
	Carvin Channel   Carvin Museum   FAQ   Search   Members   Register   Profile   Log in to check your PMs   Log in

quick question          Carvin.com BBS Forum Index » Carvin Bass Amplifiers View previous topic :: View next topic   Jump to Bottom of Page   quick question  Posted: Sat Nov 14, 2009 10:26 am   Message   shovelhead Gold Member Joined: 05 Mar 2009 Posts: 136 Location: kingston il i was wondering if you would think there is a difference between the br510 the combo amp or the sbx 210 which is the amp and cab are separate .thanks i appreciate the info re: quick question  Posted: Sat Nov 14, 2009 2:15 pm   Message   Wannabe1 Platinum Member Joined: 14 Jan 2007 Posts: 399 Location: NJ You should get better low end from the sbx210 and you can carry the components separately rather than having to have the combo and you can more easily add on or upgrade cabs. re: quick question  Posted: Sat Nov 14, 2009 11:40 pm   Message   shovelhead Gold Member Joined: 05 Mar 2009 Posts: 136 Location: kingston il thanks wannabe , iw as wondering if you think there is enough head room with the sbx210 it;s either that or sbx410 with maybe the brx 210 or sbx410 and a br118 re: quick question  Posted: Sun Nov 15, 2009 8:50 am   Message   Wannabe1 Platinum Member Joined: 14 Jan 2007 Posts: 399 Location: NJ If you want more volume, I'd go with a different head. The BX500 is gonna put out 500 watts at 4 and 2 ohms, so you're not going to see any wattage increase by adding a BRX2x10 to a BRX4x10 since they're both 4 ohms. If you want a lot of power, I'd go with the B1500 and the BRX410. You can always add another 4x10 or 2x10 to get extra power and extra speaker surface area. If you're heart is set on the BX500 and you want lots of low end, get the BRX410. Remember, this amp isn't bi-ampable so getting a 1x18 could muddy things up since both the 4x10 and the 1x18 will be reproducing the exact same signal, there's no split... re: quick question  Posted: Sun Nov 15, 2009 10:47 am   Message   shovelhead Gold Member Joined: 05 Mar 2009 Posts: 136 Location: kingston il wannabe thanks for the input i really appreciate it        Carvin.com BBS Forum Index » Carvin Bass Amplifiers Page 1 of 1 Top of Page All times are GMT - 4 Hours View previous topic :: View next topic Display posts from previous: All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 Year Oldest FirstNewest First  Jump to: Select a forum Off-Topic----------------AnnouncementsFAQCarvin Photo GalleryWebsite Suggestions Carvin Products----------------Carvin GuitarsCarvin MIDI Synth GuitarsCarvin BassesCarvin Guitar AmplifiersCarvin Bass AmplifiersCarvin Pro AudioTech TalkBuilder's ForumProduct Suggestions Other Carvin Discussion----------------Share Your Carvin-Made MusicPro PlayersCarvinite Gatherings Non-Carvin Gear----------------Non-Carvin Gear  You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum The views and opinions expressed on the Carvin Forums are solely the responsibility of the authors, and do not necessarily reflect the opinion of Carvin Corporation. The Carvin.com administrators will block all e-mail addresses violating the established BBS rules. Topics that are not based on Carvin Gear or experiences with Carvin Gear will be subject to prompt deletion. Powered by phpBB © 2001, 2002 phpBB Group